///
/// Copyright (c) 2013-2015 Sensus Metering Systems
///
using System;

namespace TBF.BenchControl.Elde
{
    public enum Command
    {
        None  = 0,          /// Do nothing, just transfer data (route, etc.)
        Start = 1,          /// Start the measurement
        Stop  = 2,          /// Stop the measurement
		ReadDivTransition = 4,
		ReadExtremasOfPulses = 6,
		ReadShapesOfPulses = 7,
		ResetShapesOfPulses = 8,
    }

#if FUZHOU300 || PT200IL || TORINO50 || BADGER_MALA_TRAT || IPERLST || BADGER_VELKA_TRAT
    public enum StatusP : ulong
    {
        RefFlowMeterMask  = 0x7,
        TestCompleted     = 0x10,
        TestInProgress    = 0x20,
        //DiverterError   = 0x20,
        MsrmntWithDivrtr  = 0x80,
        RefPulsesMsrmnt   = 0x100,
		SynchroMethod     = 0x800,
		WaterMeterCalib   = 0x1000,
		EmgcyStopActive   = 0x2000,
 		MsrmntGateActive  = 0x4000,
		TimeMeasurement   = 0x8000,
		FrequencyMeasured = 0x80000,
		ADCError          = 0x80000000,
		TimeoutOccured    = 0x100000000,
		MeretAddresses    = 0x200000000,
		SampleBuferFull   = 0x400000000,
		ErrorTempMeter    = 0x10000000000,
		ErrorPressMeter1  = 0x1000000000000,
		ErrorPressMeter2  = 0x2000000000000,
		ErrorPressMeter3  = 0x4000000000000,
		ErrorPressMeter4  = 0x8000000000000,
	}
#else // DN100 || MUNICH || FUZHOU150 || TORUN_PT50_2015 || CEVAK_PT40_272 || MURES_PT40 || FUZHOU_40
	public enum StatusP : ulong
    {
        RefFlowMeterMask  = 0x7,
        TestInProgress    = 0x8,
        TestCompleted     = 0x10,
        DiverterError     = 0x20,
        MsrmntWithDivrtr  = 0x80,
        RefPulsesMsrmnt   = 0x100,
		SynchroMethod     = 0x800,
		WaterMeterCalib   = 0x1000,
		EmgcyStopActive   = 0x2000,
 		MsrmntGateActive  = 0x4000,
		TimeMeasurement   = 0x8000,
		FrequencyMeasured = 0x80000,
		ADCError          = 0x80000000,
		TimeoutOccured    = 0x100000000,
		MeretAddresses    = 0x200000000,
		SampleBuferFull   = 0x400000000,
		ErrorTempMeter    = 0x10000000000,
		ErrorPressMeter1  = 0x1000000000000,
		ErrorPressMeter2  = 0x2000000000000,
		ErrorPressMeter3  = 0x4000000000000,
		ErrorPressMeter4  = 0x8000000000000,
	}
#endif

	public enum StopDevs
	{
		None				 = 0,
		Reference			 = 0x01,
		Diverter			 = 0x02,
		GatePulse			 = 0x08,
		TimeMeasurement		 = 0x10,
		BypassDevCoupled2Div = 0x20,
		RegValveRegulation	 = 0x80,
        All                  = 0xFF,
	}

    public enum TestMethods
    {
        Diverter   = 0x01,     /// 0x01 = Mass method (diverters are used), 0 = Volume method
        FixedStart = 0x02,
        Synchro    = 0x04,     /// 0x02 = Synchro method, 0 = Pulse counting
    }

    public enum RegulValveMode : byte
    {
        None			= 0,
        PulseWidth		= 1,	/// Pulse width 0.05 .. 2 sec.
        TargetPosition	= 2,	/// Low and high position (=DAC value) limits (0..100%) are specified
        TargetFrequency = 3,	/// Low and high frequency limits (0..2000Hz,0..2200Hz) are specified
        Stop			= 4,	/// Stop regulation
    }

	public enum RegulValveState
	{
		Idle		  = 0,
		PwOrFreqRegul = 2,
		DacValueRegul = 3,
	}
}