Milan Hanajik
|
511ef6a1f3
|
ErrorFlags : (1) bool --> (sbyte)ErrorFlagsMode, (2) Mode disappeared, (3) Prepared for E1 .. E63
|
2019-12-13 11:18:12 +01:00 |
|
Milan Hanajik
|
3e026d7129
|
Elde.RegisterReader.RegisterReader.Position, IRegisterReader.Position, etc. introduced., ver. 2.24.1365
|
2019-11-20 13:09:38 +01:00 |
|
Milan Hanajik
|
dd8ea86fc3
|
FixedStartDeferredEval a FixedStartMassCollDeferredEval
|
2019-11-19 07:54:54 +01:00 |
|
Milan Hanajik
|
b5be8f74bf
|
(1) FixedStartSeq code cleanup, scale/tank/draining/mass measurement removed, (2) Adjustment.WMErrorsForm-s are more robust, ver. 2.24.1364
|
2019-11-15 16:53:57 +01:00 |
|
Milan Hanajik
|
7fd4966757
|
Uncertainty under construction, Results DB TestRslt table modified
|
2019-10-30 09:24:49 +01:00 |
|
Milan Hanajik
|
1ca6b182d4
|
iPerlCommunication : DelayBetweenRetries introduced.
|
2019-10-28 17:05:51 +01:00 |
|
Milan Hanajik
|
870d57fb67
|
(1) ProcedureDlg: Draining before/after in Process tab, (2) DoDrainingAfter implemented in test method sequences.
|
2019-10-28 17:05:41 +01:00 |
|
Milan Hanajik
|
28123c3a31
|
Transition sequences and hydraulic paths are not displayed and cannot be edited for test methods with DoTranisitions( ) == false.
|
2019-10-24 12:57:52 +02:00 |
|
Milan Hanajik
|
dbe87a375d
|
TransitionContext.AfterTestWithOverlap, PID coef. set earlier as well, nextHydroTest in MainSeq.
|
2019-10-24 12:56:59 +02:00 |
|
Milan Hanajik
|
b37023eff7
|
(1) TestMethods.Dummy component, (2) Three custom shared buttons, (3) ProcedureDlg and Procedures.TestWizard modified.
|
2019-10-11 16:52:09 +02:00 |
|
Milan Hanajik
|
adc9e4efe4
|
Clean-up
|
2019-09-19 07:45:35 +02:00 |
|
Milan Hanajik
|
74f8c44783
|
Config.Data.RealDensity etc., DataContainers.Density and Buoyancy components, related metrology tabs modified/created.
|
2019-09-18 18:49:00 +02:00 |
|
Milan Hanajik
|
994568799d
|
Refactorization: TBF.UI namespace, no change of function, ver. 2.18.1314
|
2019-09-17 10:58:44 +02:00 |
|
Milan Hanajik
|
e2650736cd
|
iPerlCommunication simulation
|
2019-09-12 13:50:47 +02:00 |
|
Milan Hanajik
|
6079c8419f
|
(1) Diverter switch time measurement modifications (2) const int CountWhenSendingRdDivCmd = 1, CountWhenReadingDiv = 3.
|
2019-09-04 15:08:36 +02:00 |
|
Milan Hanajik
|
e61e5c59cb
|
TestMethods.Q2CorrectionFromHistory sets test results, TODO: Web service.
|
2019-08-27 14:40:30 +02:00 |
|
Milan Hanajik
|
c3d5e157ec
|
TestMethods.Q2CorrectionFromHistory slightly modified, no State.Create() and do {} while loop, ver. 2.18.1297
|
2019-08-15 18:22:53 +02:00 |
|
Milan Hanajik
|
ef5320917a
|
CalculatedInitQ2CorrXY added to ProcessData, used in InitOrReadQ2Correction(...), TestMethods.Q2CorrectionFromHistory added, ver. 2.18.1295
|
2019-08-15 16:05:17 +02:00 |
|
Milan Hanajik
|
838ec17b29
|
TestMethods.DiverterTest bug fix, correction time applied 'DivRepetitions' times now, ver. 2.18.1284
|
2019-08-08 14:45:35 +02:00 |
|
Milan Hanajik
|
e98d633d7f
|
FlyingMassCollComparative method supports multiple lift valves.
|
2019-07-23 12:09:21 +02:00 |
|
Milan Hanajik
|
fa22b6a8c7
|
DiverterTest : One single statistics (temperature, ...) for complete diverter test loop
|
2019-07-10 16:00:27 +02:00 |
|
Milan Hanajik
|
a6b8fade23
|
(1) DiverterTest component added, (2) Filipiny_50 component 9.7.2019, (3) flowMeterIdxAndDiv for FILIPINY_50, ver. 2.18.1263
|
2019-07-09 15:58:13 +02:00 |
|
Milan Hanajik
|
4fbf471ea0
|
TestMethods.SensitivityTest added, STOP handled correctly in SensitivityTestSeq, ver. 2.18.1261
|
2019-07-08 12:52:28 +02:00 |
|
Milan Hanajik
|
096b649e40
|
iPerl : Pruefindex is compared with the max. allowed value only in case WM is Failed (either Pink or Magenta back color), ver. 2.18.1254
|
2019-06-25 18:24:09 +02:00 |
|
Milan Hanajik
|
b873dd5bf5
|
TBF : iPerl : Two bug fixes : (1) checking previous records, (2) evaluating MaxProefindex
|
2019-06-19 15:31:56 +02:00 |
|
Milan Hanajik
|
db6903e406
|
TBF : SensusTestInfo for Greece added, Q2 correction for Greece modified, ver. 2.18.1244
|
2019-06-14 11:03:11 +02:00 |
|
Milan Hanajik
|
2382ceea73
|
TestMethods.LeakTest : Start and End mass saved to test result.
|
2019-05-30 08:32:37 +02:00 |
|
Milan Hanajik
|
0c72e76ecc
|
TestMethods.LeakTest : Test parameters IsPumpRunning, MaxPressureDrop and MaxMassIncrease added.
|
2019-05-29 15:31:11 +02:00 |
|
Milan Hanajik
|
47b6bb4cf7
|
ProductionTracing : wm.IsLastErrorOk used again, ErrorFlags bit E28 set in iPerlCheck appropriately, ver. 2.18.1235
|
2019-05-23 10:30:28 +02:00 |
|
Milan Hanajik
|
944862dde0
|
iPerlCommunicationForm : (1) OutOfRange / Q2OutOfRange aren't an RFID error, (2) CommFailed cleanup, (3) WriteQ2Correction(..) cleanup (updateQ2adjByCalibFactor arg.
|
2019-05-22 14:30:10 +02:00 |
|
Milan Hanajik
|
14a5721649
|
IperlHead : TestEndTelegramIx obtained in a correct way.
|
2019-05-22 14:29:20 +02:00 |
|
Milan Hanajik
|
93bcde2599
|
More robust reading of the start sample from opto-data.
|
2019-05-21 14:40:22 +02:00 |
|
Milan Hanajik
|
53795db720
|
Output. ... .Tracing.CheckPreviousRecordOfSingleWM(.) cleanup : E28 is used everywhere : fixed
|
2019-05-16 13:35:11 +02:00 |
|
Milan Hanajik
|
156215bea6
|
(1) Modbus.CometAmbient.Ambient. UpdateProcessData(..) was missing, (2) FixedStartMassCollection : Flow regulation stopped after test.
|
2019-05-16 10:34:47 +02:00 |
|
Milan Hanajik
|
357a216b6b
|
Stopping flow regulation after test in all remaining FlyingStart.... sequences.
|
2019-05-15 16:05:14 +02:00 |
|
Milan Hanajik
|
1a122cfa12
|
Various.Evaporation comp., MetrologyDlgEvaporationTab and IEvaporation/IScaleOrTank/ITankDraining with EvaporationRate(double T) introduced.
|
2019-05-15 15:14:04 +02:00 |
|
Milan Hanajik
|
59087474d9
|
Results.Entities.TestRslt.TestTimeCorrection added and used in test methods with diverter.
|
2019-05-15 11:18:38 +02:00 |
|
Milan Hanajik
|
55ed11ae58
|
Results.Entities.TestRslt.TimeBtwnMassMsrmnts added, evaluated in test methods, ver. 2.18.1226
|
2019-05-14 16:59:20 +02:00 |
|
Milan Hanajik
|
3075169fd1
|
Output.ProductionTracing.Tracing.CheckPreviousRecordOfSingleWM(.) cleanup : E28 is used everywhere, ver. 2.18.1225
|
2019-05-13 09:50:58 +02:00 |
|
Milan Hanajik
|
7724c004a0
|
Elde interface : filters, pidCoef and shortPulses are set by SetFilterPidShortPulses( ) only.
|
2019-05-10 16:28:18 +02:00 |
|
Milan Hanajik
|
4221de3b22
|
Stopping flow regulation modifications : cmd=Stop, real flowMeterNr used.
|
2019-05-10 10:53:48 +02:00 |
|
Milan Hanajik
|
c1cfc67cce
|
Bug fix in calculated Q2 error value MakeQ2CorrectedFrom( ), iPerl.CalibTargetQ2 is used now, ver. 2.18.1219
|
2019-05-10 08:38:46 +02:00 |
|
Milan Hanajik
|
7fa06079c2
|
Short pulses bug fix : argument was not sent when reading diverter transitions, ver. 2.18.1218
|
2019-05-09 16:22:20 +02:00 |
|
Milan Hanajik
|
fa1dc3cc62
|
(1) DAWA 300 has 10 water meter, (2) Results screen updated after a counter increment.
|
2019-05-07 14:37:03 +02:00 |
|
Milan Hanajik
|
d197629cdb
|
Static counters added (not mapped to DB now), ver. 2.18.1213
|
2019-05-07 12:36:47 +02:00 |
|
Milan Hanajik
|
f8a2126c90
|
TestMethods.Counter added, ver. 2.18.1211
|
2019-05-06 13:45:07 +02:00 |
|
Milan Hanajik
|
5936efcad2
|
IperlHead : Opto data correctly saved in case of test repetitions (iPerlSpecial), ver. 2.18.1208
|
2019-05-03 12:14:52 +02:00 |
|
Milan Hanajik
|
04547306d0
|
Bug fix : Purging sequence is executed after cycle selection after a STOP in the previous evacuation sequence, ver. 2.18.1207
|
2019-05-03 09:47:26 +02:00 |
|
Milan Hanajik
|
d0bba74dff
|
(1) filters[] initialized earlier in test method sequences, (2) filters and shortPulses used in SetFlowOp(.), ver. 2.18.1206
|
2019-05-02 10:23:33 +02:00 |
|
Milan Hanajik
|
1e97a26863
|
(1) PreviousResults : 'Fix' option added to 'Send again' and 'Reload', (2) Missing PCB nr. does not cause a production tracing error.
|
2019-04-30 13:17:08 +02:00 |
|