tbf/TBF/BenchControl/Elde/ControlBoardDev.cs

///
/// Copyright (c) 2013-2017 Sensus Metering Systems
///
using System;
using System.Text;
using System.IO.Ports;
using System.Collections.Generic;
using Config.Entities;
using Dirichlet.Numerics;
using TBF.BenchControl.Generic;
using TBF.BenchControl.GenericDevices;
using log4net;

namespace TBF.BenchControl.Elde
{
    public class ControlBoardDev : ComponentBase, IDevice, IValveControl
    {
        private static readonly ILog log = LogManager.GetLogger(typeof(ControlBoardDev));
		public override string ToString() { return string.Format("ControlBoard({0})", Cfg.ToString(1)); }

		readonly ControlBoardCfg controlBoardCfg;

		///
        /// Reference to the control board component
		///
		IControlCom controlCom;

		/// <summary>
		/// Emergency stop signal state updated by RunDevice().
		/// 'modelessDlg' is notified about the changes and uses this information to change its visibility.
		/// </summary>
		//UiBridge.EmergencyStopEventArgs.State emergencyStopState;


		///
		/// Public read only wrappers for Elde software component fields
		///
        /// rvNr1  = 1 .. nrRegulValves (one based)
        /// wmNr0  = 0 .. nrWaterMeters-1 (zero based)
        /// tmpNr0 = 0 .. nrTempMeters-1 (zero based)
        /// prsNr0 = 0 .. nrPressureMeters-1 (zero based)
        ///
		public StatusP StatusP                      { get { return controlCom.StatusP; } }
		public double ReferenceFreq                 { get { return controlCom.ReferenceFreq; } }     /// In [Hz] 0..2500, nom.=2000
		public int EtPulses(int wmNr1)                    { return controlCom.EtPulses(wmNr1); }
        public int EtPulsesK                        { get { return controlCom.EtPulsesK; } }
		public UInt16 WMeterPulses(int wmNr1)             { return controlCom.WMeterPulses(wmNr1); }
		public int WMeterReference(int wmNr0)             { return controlCom.WMeterReference(wmNr0); }
		public uint RegulValveDAC(int rvNr0)              { return controlCom.RegulValveDAC(rvNr0); }
		public float Pressure(int prsNr0)                 { return controlCom.Pressure(prsNr0); }
		public float Temperature(int tmpNr0)              { return controlCom.Temperature(tmpNr0); }
		public RegulValveState RegulValveState(int rvNr1) { return (RegulValveState)controlCom.RegulValveState(rvNr1); }
		public UInt128 RRoute                       { get { return controlCom.RRoute; } }
		public uint DivTime(int id)                       { return controlCom.DivTime(id); }
		public float TTime                          { get { return controlCom.TTime; } }
        public float ImpulseTime(int wmNr1)               { return controlCom.ImpulseTime(wmNr1); }
		public uint FmState                         { get { return controlCom.FmState; } }
		public uint BeginState(int wmNr0)                 { return controlCom.BeginState(wmNr0); }
		public double ReferenceFlow                 { get { return controlCom.ReferenceFlow; } }
		public float RValvePosition(int rvNr1)            { return controlCom.RValvePosition(rvNr1); }
        public float DivSamples(int time, int divIx0)     { return controlCom.DivSamples(time, divIx0); }     /// Time unit is 2 ms
		public int ScopeSamples(int i, int j, int k)      { return controlCom.ScopeSamples(i, j, k); }
		public ulong DigitalInputs                  { get { return controlCom.DigitalInputs; } }
		public float AnalogInput(int adcNr0)              { return controlCom.AnalogInput(adcNr0); }
		public uint AnalogInputRaw(int adcNr0, int bank)  { return controlCom.AnalogInputRaw(adcNr0, bank); } /// adcNr0: 0=RV1, 1=RV2,... bank: 0=RV, 1=Temp
		public float ReferenceVolume                { get { return controlCom.TotalRefVolume; } }
		public float VyslExt(int wmNr0, int what)         { return controlCom.VyslExt(wmNr0, what); }
        public uint[] CyclePar                      { get { return controlCom.CyclePar; } set { controlCom.CyclePar = value; } }
		public uint[] WMeterCont					{ get { return controlCom.WMeterCont; } }
        public bool ManualUIAllowed                 { get { return controlCom.ManualUIAllowed; } set { controlCom.ManualUIAllowed = value; } }
        public float ValveOpenCloseTime             { get { return controlCom.ValveOpenCloseTime; } }

        /// <summary> Extracted from the StatusP in RunDeviceBefore </summary>
        public bool EmergencyStop { get { return emergencyStop; } }
        bool emergencyStop;
        bool previousEmergencyStop;



		private int flowmeterNr4DiverterTest;
		private bool scheduleDiverterToTank;
		private bool scheduleDiverterToSink;
		private bool scheduleReadDiverterTransition;
		private bool pumpPowerChanged;
		/// 
		public void DiverterToTank(int flowmeterNr)
		{
			if (!scheduleDiverterToSink && !scheduleReadDiverterTransition && !emergencyStop)
			{
				flowmeterNr4DiverterTest = flowmeterNr;
				scheduleDiverterToTank = true;
			}
		}
		///
		public void DiverterToSink(int flowmeterNr)
		{
			if (!scheduleDiverterToTank && !scheduleReadDiverterTransition && !emergencyStop)
			{
				flowmeterNr4DiverterTest = flowmeterNr;
				scheduleDiverterToSink = true;
			}
		}
		///
		public void ReadDiverterTransition(int flowmeterNr)
		{
			if (!scheduleDiverterToTank && !scheduleDiverterToSink && !emergencyStop)
			{
				flowmeterNr4DiverterTest = flowmeterNr;
				scheduleReadDiverterTransition = true;
			}
		}



        /// <summary> State of valves sent out - buffered by the last SendCommand() </summary>
        public UInt128 Route { get { return benchModelRoute; } }

        UInt128 valvesToInvert;			/// Route = valesToInvert ^ RequiredRouteWithoutInvertedVlaves
        readonly UInt128 routeMask;		/// This mask masks out virtual valves, routeMask is set in the constructor 

        ///
        /// Initialization data updated by constructors of children components
        /// and sent to 'controlCom2panel' by SendCalibData() method.
        ///
        public float[,] TempCalibData = new float[8, 5];
		public uint[] DiverterEdge;			/// Created and initialized in this.Initialize() 

        // Array length is the reference flowmeters count plus one
#if DN100 || FUZHOU_150 || FUZHOU_300 || IZRAEL_200 || PUCHONG_200 || SLM_150 || SENTEC || CEVAK_200
        public uint[,] RegValveCalib = new uint[8,2] {{100,500},{100,500},{100,500},{100,500},{100,500},{100,500},{100,500},{100,500}};
		public byte[] MeretRS485Address = new byte[4];
        public float[] EtCalib = new float[6] { 1, 1, 1, 1, 1, 1 };
#elif GENESIS || BERLIN || PETERSBURG_200 || RUM_MOB
        public uint[,] RegValveCalib = new uint[16, 2] { {100,500}, {100,500}, {100,500}, {100,500},
														 {100,500}, {100,500}, {100,500}, {100,500}, 
														 {100,500}, {100,500}, {100,500}, {100,500}, 
														 {100,500}, {100,500}, {100,500}, {100,500} };
        public byte[] MeretRS485Address = new byte[4];
        public float[] EtCalib = new float[7] { 1, 1, 1, 1, 1, 1, 1 };
#elif MUNICH || TORINO_50 || BADGER_MALA_TRAT || BADGER_STREDNA_TRAT || TORUN_50 || CEVAK_40 || TURA_IPERL || TURA_SPECIAL || MURES_40 || FUZHOU_50 || SLM_50 || PETERSBURG_50 || KEMPNO_50 || BAHRAIN_50 || KRAKOW_50 || JUZNA_AFRIKA_50 || ZAMBIA || FEWA_50 || FUZHOU_100
        public uint[,] RegValveCalib = new uint[8,2] {{100,500},{100,500},{100,500},{100,500},{100,500},{100,500},{100,500},{100,500}};
		public byte[] MeretRS485Address = new byte[4];
		public float[] EtCalib = new float[5] { 1, 1, 1, 1, 1 };
#elif IZRAEL_50 || SLM_END
        public uint[,] RegValveCalib = new uint[8,2] {{100,500},{100,500},{100,500},{100,500},{100,500},{100,500},{100,500},{100,500}};
        public byte[] MeretRS485Address = new byte[7];      /// Modbus addresses of Pr1, Pr2, Pr3, Pr4, Pr5, Pr6, T9 (Izrael) or Pr1, Pr2, Pr3, Pr4, T9, T10 (SLM END)
        public float[] EtCalib = new float[5] { 1, 1, 1, 1, 1 };
#elif WARSAW_END
		public uint[,] RegValveCalib = new uint[8,2] {{100,500},{100,500},{100,500},{100,500},{100,500},{100,500},{100,500},{100,500}};
        public byte[] MeretRS485Address = new byte[4];
		public float[] EtCalib = new float[5] { 1, 1, 1, 1, 1 };
#elif MALTA_WSD25
		public uint[,] RegValveCalib = new uint[8,2] {{100,500},{100,500},{100,500},{100,500},{100,500},{100,500},{100,500},{100,500}};
        public byte[] MeretRS485Address = new byte[12];
        public float[] EtCalib = new float[9] { 1, 1, 1, 1, 1, 1, 1, 1, 1 };
#elif BADGER_VELKA_TRAT
		public uint[,] RegValveCalib = new uint[8,2] {{100,500},{100,500},{100,500},{100,500},{100,500},{100,500},{100,500},{100,500}};
        public byte[] MeretRS485Address = new byte[4];
		public float[] EtCalib = new float[8] { 1, 1, 1, 1, 1, 1, 1, 1 };
#endif

		public uint[] BalanceRange = new uint[2];


        ///
        /// Private values sent by the last SendCommand()
        ///
        bool sendCommandFlag;
        Command cmd;
        int refNr;
        UInt128 benchModelRoute;
        int totalRefPulses;
		int massRefPulses;
		TestMethods testMethods;
        int[] filters;
        float[] FMFreq;
        int regConst;
        int shortImp;
        StopDevs stopDevs;

        /// <summary>
        /// Sets the power of the selected pump
        /// </summary>
        /// <param name="index">Pump index 0 .. 5, invalid pump index sets all pumps to 0%</param>
        /// <param name="power">Power (0.0f .. 100.0f)</param>
        public void SetFMFreq(int index, float power)
        {
#if DN100 || MUNICH || FUZHOU_150
            if ((FMFreq == null) || (FMFreq.Length != 2))
			{
				FMFreq = new float[2];
				pumpPowerChanged = true;	/// Forces sending a command using Command.None
			}
#elif SLM_END || WARSAW_END
            if ((FMFreq == null) || (FMFreq.Length != 4))
			{
				FMFreq = new float[4];
				pumpPowerChanged = true;	/// Forces sending a command using Command.None
			}
#else /// all newer benches
			if ((FMFreq == null) || (FMFreq.Length != 6))
			{
				FMFreq = new float[6];
				pumpPowerChanged = true;	/// Forces sending a command using Command.None
			}
#endif

			if (index >= 0 && index < FMFreq.Length && FMFreq[index] != power)
			{
				FMFreq[index] = power;

				pumpPowerChanged = true;	/// Forces sending a command using Command.None

				log.DebugFormat("FMFreq=[{0}{1}{2}{3}{4}{5}]",
								FMFreq[0].ToString(),
								(FMFreq.Length > 1) ? ("," + FMFreq[1].ToString()) : "",
								(FMFreq.Length > 2) ? ("," + FMFreq[2].ToString()) : "",
								(FMFreq.Length > 3) ? ("," + FMFreq[3].ToString()) : "",
								(FMFreq.Length > 4) ? ("," + FMFreq[4].ToString()) : "",
								(FMFreq.Length > 5) ? ("," + FMFreq[5].ToString()) : "");
			}
        }


        static bool doMassesVolumesLog = true;
        /// 
        public void UpdateWeights()
        {
			for (int i = 0; i < MettlerToledo.Standard.BalanceDev.BalancesCount; i++)
            {
                double mass = MettlerToledo.Standard.BalanceDev.Masses[i];
				controlCom.SetWeight(i, mass);
                if (doMassesVolumesLog) log.DebugFormat("UpdateWeights() : ix={0} mass={1}", i, mass);
            }

			for (int i = 0; i < MettlerToledo.Multi.BalanceDev.BalancesCount; i++)
			{
                double mass = MettlerToledo.Multi.BalanceDev.Masses[i];
                controlCom.SetWeight(i, mass);
                if (doMassesVolumesLog) log.DebugFormat("UpdateWeights() : ix={0} mass={1}", i, mass);
            }

            int firstTankIx = Math.Max(MettlerToledo.Standard.BalanceDev.BalancesCount, MettlerToledo.Multi.BalanceDev.BalancesCount);

            for (int i = 0; i < Various.TankWithLevelMsrmnt.Tank.TanksCount; i++)
            {
                double volume = Various.TankWithLevelMsrmnt.Tank.Tanks[i].Volume;
                controlCom.SetWeight(firstTankIx + i, volume);
                if (doMassesVolumesLog) log.DebugFormat("UpdateWeights() : ix={0}, volume={1}", firstTankIx + i, volume);
            }

            //doMassesVolumesLog = false;   /// When this line is uncommented logging is done only once on startup
		}


        public void SetReservoirTemp(int nr, float temp)
        {
            controlCom.SetReservoirTemp(nr, temp);
        }

        public ControlBoardDev()
		{
		}

		/// <summary>
        /// Constructor
        /// </summary>
		public ControlBoardDev(Generic.IComponentCfg cfg)
			: base(cfg)
        {
			controlBoardCfg = cfg as ControlBoardCfg;

#if DN100 || MUNICH || FUZHOU_150
            FMFreq = new float[2] { 0, 0 };                 /// Nr. of pumps: Fuzhou150=2, Fuzhou300=6, newer=6
#elif SLM_END || WARSAW_END
            FMFreq = new float[4] { 0, 0, 0, 0 };
#else /// all newer benches
            FMFreq = new float[6] { 0, 0, 0, 0, 0, 0 };
#endif
            emergencyStop = false;
            previousEmergencyStop = false;

			routeMask = 0;
			for (int i = 0; i < 128; i++)
			{
				if (i < controlBoardCfg.VirtualValvesRangeLo || i > controlBoardCfg.VirtualValvesRangeHi)
				{
                    routeMask = routeMask | ((UInt128)1 << i);
				}
			}

			log.Debug(this.ToString());
		}

        /// <summary>
        /// Specific pre-initialization for control board only
        /// </summary>
        /// <param name="ctrlBrdComponent"></param>
        public void InitializeComponent(
#if DN100
			ControlCom2VB.ControlCom2panel ctrlBrdComponent,
#elif MUNICH || FUZHOU_150
			ControlComponent3Munich.UserControl1 ctrlBrdComponent,
#elif FUZHOU_300
            ControlComponent3F300.UserControl1 ctrlBrdComponent,
#elif IZRAEL_200 || PUCHONG_200 || GENESIS || BERLIN || SLM_150 || PETERSBURG_200
            ControlComponent_Izrael2014.UserControl1 ctrlBrdComponent,
#else /// all newer benches
			ControlComponent_Torino2015.UserControl1 ctrlBrdComponent,
#endif
 UInt128 valvesToInvert,
            double[] tankCapacities)
        {
            this.valvesToInvert = valvesToInvert;
            this.benchModelRoute = valvesToInvert;

			if (controlBoardCfg.DebugLevel == DebugMode.Simulate)
			{
				controlCom = new ControlComSim();
			}
			else
			{
				/// Default number of scales (and BalanceRange length) is 2.
				/// If there are more scales, BalanceRange length is larger.
				int scalesCnt = Math.Max(2, tankCapacities.Length);
				BalanceRange = new uint[scalesCnt];
				for (int i = 0; i < scalesCnt; i++)
				{
					BalanceRange[i] = (uint)((i < tankCapacities.Length) ? tankCapacities[i] : 0);
				}
				controlCom = new ControlComWrap(ctrlBrdComponent);
			}
        }

		/// <summary>Initialize this device</summary>
		public void Initialize()
		{
			int divertersCount = BenchControl.Elde.Diverter.Diverter.DivertersCount;

			DiverterEdge = new uint[divertersCount];
			for (int i = 0; i < divertersCount; i++)
			{
				DiverterEdge[i] = (uint)BenchControl.Elde.Diverter.Diverter.Diverters[i].ThresholdGate;
                controlCom.SetDivLimit(i, (uint)BenchControl.Elde.Diverter.Diverter.Diverters[i].ThresholdLo,
                                          (uint)BenchControl.Elde.Diverter.Diverter.Diverters[i].ThresholdHi);
			}

			controlCom.SendCalibData(RegValveCalib,
                                     MeretRS485Address,
                                     controlBoardCfg.ComPortNr,
                                     TempCalibData,
                                     EtCalib,
                                     DiverterEdge,
                                     BalanceRange);

            log.FatalFormat("Successfully initialized device {0}", ToString());
        }

		/// <summary>Run this device</summary>
		public void RunDeviceBefore()
		{
            if (DebugLevel == DebugMode.Simulate) return;

			controlCom.RunDeviceBefore();

            previousEmergencyStop = emergencyStop;
            emergencyStop = (controlCom.StatusP & StatusP.EmgcyStopActive) != 0;
            
            if (emergencyStop && !previousEmergencyStop)
            {
                Program.MainWnd.Invoke(new ShowEmergencyStopFormDlgt(ShowEmergencyStopForm));

				/// Stop the cycle - Press 'STOP' button in the BenchControlPanel
				TBF.UiBridge.Bridge.Ui2Bench(TBF.UiBridge.UI2BenchCmd.Stop);
            }
            else if (!emergencyStop && previousEmergencyStop)
            {
                UiBridge.Bridge.OnEmergencyStopChanged(this,UiBridge.EmergencyStopEventArgs.State.CloseForm);
            }

            if (emergencyStop)
            {
                /// SendCommand() arguments to clear the emergency stop state
                sendCommandFlag = true;
                this.refNr = 0;
                this.totalRefPulses = 0;
				this.massRefPulses = 0;
				this.cmd = Command.Stop;
                this.testMethods = 0;
                this.stopDevs = StopDevs.All;
            }
            else if (scheduleDiverterToTank)
            {
                /// Reset all SendCommand() arguments
                sendCommandFlag = true;
                this.cmd = Command.Start;
                this.refNr = flowmeterNr4DiverterTest;
                this.totalRefPulses = int.MaxValue;
				this.massRefPulses = int.MaxValue;
				this.testMethods = TestMethods.Diverter;
                this.stopDevs = 0;
				scheduleDiverterToTank = false;
			}
			else if (scheduleDiverterToSink)
			{
				/// Reset all SendCommand() arguments
				sendCommandFlag = true;
				this.cmd = Command.Stop;
                this.refNr = flowmeterNr4DiverterTest;
                this.totalRefPulses = 0;
				this.massRefPulses = 0;
				this.testMethods = TestMethods.Diverter;
                this.stopDevs = StopDevs.Diverter;
				scheduleDiverterToSink = false;
			}
			else if (scheduleReadDiverterTransition)
			{
				/// Reset all SendCommand() arguments
				sendCommandFlag = true;
				this.cmd = Command.ReadDivTransition;
                this.refNr = flowmeterNr4DiverterTest;
                this.totalRefPulses = 0;
				this.massRefPulses = 0;
				this.testMethods = TestMethods.Diverter;
                this.stopDevs = 0;
				scheduleReadDiverterTransition = false;
			}
			else if (pumpPowerChanged)
			{
				/// Reset all SendCommand() arguments
				sendCommandFlag = true;
				this.cmd = Command.None;
				pumpPowerChanged = false;
			}
			else
            {
                /// Reset all SendCommand() arguments
                sendCommandFlag = false;
                this.cmd = Command.None;
                this.refNr = 0;
                this.totalRefPulses = 0;
				this.massRefPulses = 0;
				this.testMethods = 0;
                this.stopDevs = 0;
            }
            this.filters = new int[] { 0, 0, 0, 0, 0, 0, 0, 0, };
            this.regConst = 0;
            this.shortImp = 0;
		}

		/// <summary>Run this device</summary>
        public void RunDeviceAfter()
        {
            if (DebugLevel == DebugMode.Simulate) return;

            UpdateWeights();

            uint[] uintFilters = new uint[8];
            for (int i = 0; i < 8; i++)
            {
                uintFilters[i] = (filters.Length > i) ? (uint)filters[i] : uintFilters[i - 1];
            }

            ///
            if (sendCommandFlag)
            {
                controlCom.SendCommand(cmd, refNr, (benchModelRoute & routeMask),
									   totalRefPulses, massRefPulses, testMethods,
                                       uintFilters,
                                       FMFreq, regConst, shortImp, stopDevs);
            }

            controlCom.RunDeviceAfter();
        }

        /// <summary>Stop this device</summary>
        public void StopDevice() { }
		public void StopDevice2() { }


        delegate void ShowEmergencyStopFormDlgt();
        /// 
        void ShowEmergencyStopForm()
        {
            (new TBF.Forms.EmergencyStopForm()).Show();
        }


		/// <summary>
        /// Sends a command to the control board.
        /// </summary>
        /// <param name="cmd">See ControlBoard.Command enum</param>
        /// <param name="refFlowmtrNr">Number of the etalon/reference (1..5)</param>
        /// <param name="route">Route: 64-bit installation specific number</param>
        /// <param name="totalRefPulses">kolko impulzov ma trvat skuska</param>
        /// <param name="testMethods">See ControlBoard.TestMethods enum</param>
        /// <param name="filterConstant">0 = No filtering (0..255)</param>
        /// <param name="regConst">Coefficient used to control reg. valves (1..100)</param>
        /// <param name="shortImp">0 = default value, 1 = spec. processing of very short pulses</param>
		/// <param name="stopDevs">What to stop</param>
		public void SendCommand(Command cmd, int refFlowmtrNr, UInt128 route,
								int totalRefPulses, int massRefPulses, TestMethods testMethods,
                                int[] filters, int regConst, int shortImp, StopDevs stopDevs)
        {
            this.cmd = cmd;
            this.refNr = refFlowmtrNr;
            this.benchModelRoute = route;
            this.totalRefPulses = totalRefPulses;
			this.massRefPulses = massRefPulses;
			this.testMethods = testMethods;
            this.filters = filters;
            this.regConst = regConst;
            this.shortImp = shortImp;
            this.stopDevs = stopDevs;

            sendCommandFlag = true;
        }

        /// <summary>
        /// Set valves to new positions.
        /// </summary>
        /// <param name="valvesToOpen">'ulong' with bits of valves to open set to '1'</param>
        /// <param name="valvesToClose">'ulong' with bits of valves to close set to '1'</param>
        /// <returns>'ulong' with bits of valves that have changed set to '1'</returns>
        public UInt128 SetValves(UInt128 valvesToOpen, UInt128 valvesToClose, IList<Elde.ValveEx.Valve> extendedValves)
        {
            UInt128 oldRoute = benchModelRoute;
            benchModelRoute = (((benchModelRoute ^ valvesToInvert) | valvesToOpen) & (~valvesToClose)) ^ valvesToInvert;
			foreach (var extV in extendedValves) extV.UpdateRoute(ref benchModelRoute);
			log.DebugFormat("SetValves(x,x), new route = {0}", Utils.RouteToStr(benchModelRoute));
			sendCommandFlag = true;
            return oldRoute ^ benchModelRoute;
        }

		/// <summary>
		/// Set Route to value returned by RRoute. Take virtual valves into account.
		/// </summary>
		/// <returns>'ulong' with bits of valves that have changed set to '1'</returns>
        public UInt128 SyncRoute()
		{
            UInt128 oldRoute = benchModelRoute;
			benchModelRoute = (RRoute & routeMask) | (benchModelRoute & (~routeMask));
			log.DebugFormat("SyncRoute(), new route = {0}", Utils.RouteToStr(benchModelRoute));
			return oldRoute ^ benchModelRoute;
		}

        /// <summary>
        /// Regulation valves control.
        /// </summary>
        /// <param name="valveNo">Regulation valve nr. (1..5)</param>
        /// <param name="valveMode">Valve regulation mode, see the enum</param>
        /// <param name="valveValue">Target position or target frequency or pulse duration</param>
        /// <param name="stableTime">Stabilization time when setting the flow: 0=200ms, step 50ms, max. 1.5 sec.</param>
        public void ValveMove(int valveNo, RegulValveMode valveMode, float[] valveValue, int stableTime)
        {
            controlCom.ValveMove(valveNo, valveMode, valveValue, stableTime);
        }


        /// <summary>
        /// Open one valve and/or close one valve.
        /// Events:  ValvesSet
        /// </summary>
        /// <param name="valveOpen">Valve to be opened</param>
        /// <param name="valveClose">Valve to be closed</param>
        /// <returns>Created operation</returns>
        public IOperation SetValvesOp(IValve valveOpen, IValve valveClose)
        {
            return new SetValvesOp(this, valveOpen, valveClose);
        }

		/// <summary>
        /// Open and/or close multiple valves.
        /// Events:  ValvesSet
		/// </summary>
        /// <param name="valvesOpen">A list of valves to be opened</param>
        /// <param name="valvesClose">A list of valves to be closed</param>
        /// <returns>Created operation</returns>
        public IOperation SetValvesOp(IList<IValve> valvesOpen, IList<IValve> valvesClose)
		{
			return new SetValvesOp(this, valvesOpen, valvesClose);
		}

        /// <summary>
        /// Starts the measurement.
        /// Events: MeasurementStarted
        /// </summary>
        /// <param name="flowMeter">Flow meter</param>
        /// <param name="readers">An array of register readers</param>
        /// <param name="refPulses">Number of reference pulses to complete the test</param>
        /// <returns>Created operation</returns>
        public IOperation StartMeasurementOp(OutputPath outputPath, TestMethods method,
											 float requiredFlowLo, float requiredFlowHi,
											 int refPulses, int[] filterConstants)
		{
			if (controlBoardCfg.DebugLevel == DebugMode.Simulate)
			{
				return new Operations.ReturnGivenEventOp(Event.MeasurementStarted);
			}
			else
			{
				return new StartMeasurementOp(this, outputPath, method, requiredFlowLo, requiredFlowHi,
											  refPulses, filterConstants);
			}
		}

        /// <summary>
        /// Starts the measurement.
        /// Events: MeasurementStarted
        /// </summary>
        /// <param name="flowMeter">Flow meter</param>
        /// <param name="readers">An array of register readers</param>
        /// <param name="refPulses">Number of reference pulses to complete the test</param>
        /// <returns>Created operation</returns>
        public IOperation StartProlongedMeasurementOp(OutputPath outputPath, TestMethods method,
                                                      float requiredFlowLo, float requiredFlowHi,
                                                      int totalRefPulses, int massRefPulses, int[] filters)
        {
            if (controlBoardCfg.DebugLevel == DebugMode.Simulate)
            {
                return new Operations.ReturnGivenEventOp(Event.MeasurementStarted);
            }
            else
            {
                return new StartMeasurementOp(this, outputPath, method, requiredFlowLo, requiredFlowHi,
                                              totalRefPulses, massRefPulses, filters);
            }
        }

        /// <summary>
        /// Read diverter samples from the control board and calculated the transition time.
        /// Events: Event.None
        /// </summary>
        /// <param name="div">Diverter</param>
        /// <param name="runsCountWhenSendingCmd">State machine ticks from test start/end when diverter read command is issued (obsolete)</param>
        /// <param name="runsCountWhenReadingDiv">State machine ticks from test start/end when diverter samples are read</param>
        /// <param name="transitionTimeSec">FloatBox for the resulting transition time in s</param>
        /// <param name="plotter">Statistics for plotting diverter transitions</param>
        /// <param name="batchNr">Batch number</param>
        /// <param name="testName">Test name (without repetitions)</param>
        /// <param name="repetition">Repetition number</param>
        /// <returns>Created operation</returns>
        public IOperation ReadDiverterTransitionOp(IDiverter div, int runsCountWhenSendingCmd, int runsCountWhenReadingDiv, TBF.Boxes.FloatBox transitionTimeSec,
                                                   Sequences.Statistics plotter, int batchNr, string testName, int repetition)
        {
            if (controlBoardCfg.DebugLevel == DebugMode.Simulate)
            {
                return new Operations.ReturnGivenEventOp(Event.None);
            }
            else
            {
                return new ReadDiverterTransitionOp(this, div, runsCountWhenSendingCmd, runsCountWhenReadingDiv, transitionTimeSec, plotter, batchNr, testName, repetition);
            }
        }

        /// <summary>
        /// Queries th econtrol board whether the measurement was completed.
        /// Events: MeasurementCompleted or None
        /// </summary>
        /// <returns>Created operation</returns>
        public IOperation QueryMeasurementEndOp()
        {
            return new QueryMeasurementEndOp(this);
        }

   		/// <summary>
        /// Stop the previous control board operation (diverter, gate, etc.)
		/// Events:  PreviousStopped
		/// </summary>
        /// <returns>Created operation</returns>
        public IOperation StopPreviousOp()
        {
            return new StopPreviousOp(this);
        }

		/// <summary>
		/// Sends commands to the control board.
		/// Events: Event.None, Event.CommandCompleted
		/// </summary>
		/// <param name="commandOnStartOp">Command sent to CB when this operation starts</param>
		/// <param name="commandOnStopOp">Command sent to CB when this operation stops</param>
		/// <param name="testMethod">Test method parameter</param>
		/// <returns>Created operation</returns>
		public IOperation ExecuteCommandOp(Command commandOnStartOp, Command commandOnStopOp, TestMethods testMethod)
		{
			return new ExecuteCommandOp(this, commandOnStartOp, commandOnStopOp, testMethod);
		}
    }
}